Drone Aerial Photography by AKdrones
                     Standard Operating Procedures for Zeitview Client Missions 

                                    AKdrones Have Drones. Will Travel.™

1 - Review and understand all Client Mission Objectives before accepting the Client Mission.
2 - Charge and prepare the DJI Drone and all Flight Equipment.
3 - Charge and prepare the AKdrones e-bike Expeditionary Airfield.
4 - Reconnoiter the Flight Mission area on Google Maps. (look for all potential flight hazards).
5 - Create travel directions with Google Maps for People Mover and e-bike transportation to the Client's address.
6 - Create a Flight Plan with Airhub for the Client's address for Mission fly-day.
7 - Create a new Unlock request with DJI Flysafe for the Client's address for Mission fly-day.
8 - Fly multiple practice training missions that simulate the Zeitview Client Mission.
9 - Once on-site, inspect the Mission Flight path for any hazards and obstructions such as trees, wires, structures, etc.
10 - Once on-site, check in with Zeitview, apply for LAANC Airspace Authorization, and apply for Drone Flight Insurance.
11 - Set up the AKdrones Immersive Flight Control System to include:
AKdrones e-bike EAF, DJI Drone, Flight Control System, Folding Chair, and Backpack.
12 - Begin Flight Mission (the client shot list instructions are provided for each mission. However, please note that the shot list may vary or change depending on the specific requirements of the mission).
13 - Ensure all Client Mission Objectives are completed.
14 - Review all photos and videos on the Tablet Computer to ensure all Client Mission Objectives are completed before departing the client mission area.
15 - After reviewing the photos and videos, determine if a re-shoot is needed.
16 - When satisfied that all images and videos are acceptable, repack the Drone, all Flight Equipment, and AKdrones e-bike EAF for transit. Then clean up the area around the AKdrones e-bike EAF parking area.
17 - At Home Base, Review and delete unacceptable images and videos BEFORE uploading to the Zeitview Client Mission Dashboard.
18 - At Home Base, clean, inspect, recharge, and reset all Flight Equipment and the AKdrones e-bike EAF for the next Mission.